| Products. | Please E-mail for more information on any product or any housing that we can manufacture for you. |
|
STEEL
MOUNTED BEARINGS- .
STEEL PILLOW BLOCK HOUSINGS FROM STOCK. These STEEL self
aligning bearing housings will replace your standard cast iron self
aligning housings and cut your down time to zero. For use in arduous
applications where the normal cast iron housing is not man enough for the
job. SUPPLIED WITH INSERTS OR FIT YOUR OWN Supplied with an UNBREAKABLE GUARANTEE. |
|
|
STEEL SN TYPE BLOCKS
- (SSNT)
Delivery 1 WEEK** (dependant on quantity)
These solid feet housings (can be slotted or
drilled 4 bolt) are to suit parallel bore spherical roller bearings or
roller bearing with adaptor sleeve and are designed where
strength is paramount to ISO standards. Supplied with an UNBREAKABLE GUARANTEE. |
|
|
EXALIGN*
- FROM STOCK. Glacier DU or DX bushes mounted in self aligning housings
giving alignment to 15º and will operate from -200º C to +280ºC.
suitable for many applications where self lube units fail. PLAIN BEARINGS |
|
|
EXALIGN SPECIALS *
-FROM STOCK. Any proprietary bush material can be mounted in self aligning
housings giving alignment to 15º and will operate from -200º C to
+600ºC. Housings can be in different materials or plated. Many
are available from stock or on a very short delivery. PLAIN BEARINGS. |
|
|
Most proprietary bush material can be split and mounted in self aligning split housings giving continuous alignment to 15º and will operate from -200º C to +600ºC.
|
 |
| SPLIT BRASS RIGIDS - FROM STOCK. There are 9 different styles of split brass plain bearings that we manufacture. Most ranges from 10mm to 125mm (1/2" to 5") are available from stock. |
|
| HANGER BEARINGS- FROM STOCK. The standard range of split hanger bearings are designed for shafts 20mm to 100mm (3/4" to 4") and have bronze split heads or bronze split shells . SPECIALS are available in this range as with all the other ranges we make. |
|
|
FC RANGE
Replacement steel plummer blocks for SN - SNH- SNA -SNV
& SNE are designed for applications where extra strength and resistance to
shock loads are required. Produced to a modern design they are
interchangeable with SN plummer blocks and produced on short delivery. Supplied with an UNBREAKABLE GUARANTEE. |
|
| Fully Split Self Aligning bush type bearings units have a wide field of application brought about by the use of specialised bushing.They can be used for many applications such as HIGH TEMPERATURE, CONTACT WITH LIQUIDS, HOSTILE ENVIRONMENTS Etc. |
|
|
FAN BEARINGS
(ring oiler type)
FULL IMPERIAL AND METRIC RANGE FROM STOCK. Suitable for high speeds. Quiet in operation. Self aligning. The bearing shells can be replaced without the need to dismantle the whole unit from the shaft Compensate for misalignment occuring after assembly. |
 |
| DRSL bushes for radial and/or linear movement and never need lubricating, any size manufactured. Can be produced with thrust flanges. It is important to specify the movement when ordering. Manufactured with a gunmetal base and impregnated with graphite as a lubricant. |
 |
|
SPECIALS Designers and manufacturers. Your premier supplier. |
|
