LOADS & SPEEDS for DIN 505 Units.
LOADS & SPEEDS for DIN 505 Units.
(DN5) DIN505 Medium Duty Plummer Blocks. Static Loads.
The chart shown above details the static load capacity of DIN505 units.
The
DIN505 is a medium duty two bolt plummer block which consists of a fully split cast iron
housing and a split gunmetal bush. The units are suitable for grease lubrication and
replacement bushes can be easily fitted.
(DN5) DIN505 Medium Duty Plummer Blocks. Dynamic Loads
Shaft Surface Speed In Metres Per Minute |
||||
Less than 8m/min |
9m/ min to 15.0m/ min |
16m/ min to 30.0m/ min |
31.0m/ min to 48m/ min |
49m/ min to 61.00m/ min |
The chart shown above details the dynamic load capacity of DIN505 units. Lines represent shaft surface speed in metres/ minute.
The
DIN505 is a medium duty two bolt plummer block which consists of a fully split cast iron
housing and a split gunmetal bush. The units are suitable for grease lubrication and
replacement bushes can be easily fitted.