LOADS & SPEEDS for Light series (LS) Units.
LOADS & SPEEDS for Light series (LS) Units.
Light Series (LS), Static Loads
The chart shown above details the static load capacity of Light Series.
HUNT LIGHT SERIES – Non self oiling gunmetal bearings
This range of units are supplied complete with a split cast iron housing and a split gunmetal bush. These are budget blocks which are not recommended for use when replacement bushes are required in the future.
(LS) Light Series, Dynamic loads
Shaft Surface Speed In Metres Per Minute |
||||
Less than 8m/min |
9m/ min to 15.0m/ min |
16m/ min to 30.0m/ min |
31.0m/ min to 48m/ min |
49m/ min to 61.00m/ min |
| The chart
shown above details the dynamic load capacity of Light Series. Lines represent shaft surface speed in metres/ minute. |
||||
HUNT LIGHT SERIES – Non self oiling gunmetal bearings
This range of units are supplied complete with a split cast iron housing and a split gunmetal bush. These are budget blocks which are not recommended for use when replacement bushes are required in the future.